Home > Volkswagen > 10-14 Volkswagen Golf/GTI/Jetta
Sort By:
Page of 1
D2S OEM HID Headlight bulb replacement 5000K

Discharge type 2 shielded HID bulb

D2S

Our Price: $65.00
Mega Raizin Voltage Stabilizer

Mega Raizin Voltage Stabilizer

By increasing the capacity of the condenser three-fold (compared to Blue RAIZIN), and decreasing both circuitry noise and high frequency impedance the results have been a more stable supply of voltage to all electronic devices, better gas mileage, and improved torque and audio quality.

Our Price: $90.00
Eurospot Short shifter kit for 06-08 VW Golf & Jetta MKV

Eurospot Short shifter kit for 06-08 VW Golf & Jetta
Reduces approx 30%
Revised Heavy Duty Solid shifter to Improved Shifting Point
Reverse Lock Design
Solid Steel & Alinimum construction
Shift knob is included as well as a metal lower cover

Our Price: $119.00
Digital Electronic Slim Panel Style Boost Gauge

Check out our panel style boost gauge, Readings are all in Digital and this includes its own MAP sensor. You can also set a peak boost that will alert you if you are overboosting.
Mounting is as simple as using double sided 3M Tape, And you can practically put this ANYWHERE.

Our Price: $139.00
Real Carbon Fiber Mirror Covers for Mk6 Golf

Real Carbon Fiber Mirror Covers for Mk6 Golf
Glue On or 3M Double Sided Taped on

Our Price: $160.00
EuroSpot High Flow Turbo Discharge Pipe for 2.0T TSI GTI

EuroSpot High Flow Turbo Discharge Pipe for 2.0T TSI

Fits: transverse 2008.5-UP 2.0 TSI engines (CCTA / CBFA / CPPA) with OEM K03 turbo

Deletes all the restrictions of the OEM pipe while retaining full diameter.

Replaces OEM 45.5MM Fitting with our larger 52.1MM Fitting increases diameter size allowing alot more flow

Very simple direct Bolt-on Kit, No modifications needed

List Price: $169.99
Our Price: $169.99
EuroSpot 2.0T VW & Audi Uprated Blow Off Valve Kit

CNC Aluminum with an internal piston for faster response and improved durability.

Eliminates any possibility of a ripping diaphragm that commonly occurs in OEM designs.

Excellent OEM Replacement

This kit includes

Blow Off Valve

Solenoid Valve

Harness adapter

Spare Internal Spring

List Price: $249.99
Our Price: $249.99
Sale Price: $189.99
Savings: $60.00
EuroSpot MKV MKVI Golf & Jetta FSI & TSI 2.0T

Made out of T304 Stainless Steel
High polish finish
Direct Bolt-On
3" Piping
Bolts on to stock catback system.
Unlocks true power out of the turbocharger

Backordered - Ships in 7 Days

Our Price: $330.00
2.0T FSI/TSI T3 Flanged Turbo Manifold

2.0T FSI/TSI T3 Flanged Turbo Manifold

T3 flanged turbo manifold for use with GT30R, GT35R, T04Z, or other T3 flanged turbos on the new 2.0T FSI/TSI turbo engine. Also external wastegate port for use with Tial 38mm external or Tial 44mm external (using billet adapter).

Our Price: $349.00
EuroDyne ECU Chip Reflash for VW & Audi 1.8T 2.7T & MK4 VR6 2.0T (IN STORE ONLY)

Stage 1: For use with unmodified vehicles - Typical horsepower gains of 45HP. Torque increase of 50 foot lbs - excellent driveability

Stage 2: For customers with modified intake and exhaust systems. Horsepower gains are hardware dependent.

Audi A4

Audi S4

Audi TT

VW Golf

VW Jetta

VW Passat

VW Beetle

AEB 1997/1999A4-1.8T
AMB 2002/2005A4-1.8T
AMU 2001/2002TT-225HP
AWM 2000/2003TT-180HP
AWP 2002/2005TT-180HP
BEA 2002/2006TT-225HP
APB 2000/2002S4/A6-2.7Tallroad
BEL 2004/2005A6-2.7T
AWM 2001/2003Passat
AWP 2002/2005 Golf/Jetta
AWW 2000/2001 Jetta
BDF 2002/200524V - VR6 Non Turbo
BJS 2002/200424V - VR6 Non Turbo
FSI 2.0T 2006-2008 VW

Our Price: $499.00
EuroDyne DSG performance software

We now offer performance DSG software for the DQ250 transmission.

The software can be loaded through the car’s OBD2 port.

This software is available through our dealer network, and can also be loaded by customers with our end user flash tool.

Cost is 499 USD (8 credits).

If you already have our engine ECU performance software, cost is 375 USD, or 6 credits.

Features of our DSG software include;

-Optimized shift mapping

-Decreased shift times

-Raised torque limits

-True manual mode that eliminates unwanted downshifts

-Gear display activated in dashboard

-Increased clutch clamping pressures

-more aggressive launch control settings.

List Price: $499.00
Our Price: $499.00
EuroDyne Stage 1 reflash for TSI – CCTA-CBFA

The stage 1 reflash for 2.0TSI vehicles is designed for a mechanically stock vehicle, and increases output from 200 hp to 258 hp.

Torque increases from 207 ft/lbs to 295 ft/lbs.

These ecu’s can now be port flashed, no need for ecu removal.

Price is in USD

List Price: $499.00
Our Price: $499.00
EuroDyneStage 2 reflash for 2.0 TSI – CCTA-CBFA

Our stage 2 reflash for 2.0TSI vehicles is designed to work with an upgraded Downpipe and high flow converter.

Aftermarket intakes and exhaust systems are also compatible, but not required.

Output is increased to 288 hp and torque to 345 ft lbs.

Price is in USD

List Price: $499.00
Our Price: $499.00
EuroDyne K04 Software for TSI

EuroDyne have developed a software calibration for the popular K04 turbo upgrade on 2009 and up vehicles with TSI engine.

This is a great option due to the fact that no fuel system upgrades are required in the EA888 engine to support power levels up to 360WHP.

Our in house development car, a 2009 Audi A3 Quattro (same powertrain and chassis as the VW GTI) managed a 12.4 quarter mile running a version of this calibration.

Prices are in USD

List Price: $599.00
Our Price: $599.00
VW MK6 10 - 14 Golf & Jetta JOM BlueLine Coilover Kit

VW MK6 10 - 14 Golf & Jetta JOM BlueLine Coilover Kit

The BlueLine coilover suspension kits are highgrade car-specific suspension components. The range of adjustment gives an individual body lowering. The kits have a huge transverse force absorption. The initial spring tension survives in complete range of adjustment. Adjustment is made after installation.

~ adjustment range 20mm(.78") to a 60mm(2.36") drop
~ EPS powder-coated, galvanised shock absorbers
~ dust boot, solid rubber bump stops
~ cold wound springs

Our Price: $649.99
EuroDyne DSG Performance software with powertap flash tool

We now offer performance DSG software for the DQ250 transmission.

The software can be loaded through the car’s OBD2 port.

Cost for the software with end user flash tool is 699 USD .

The cable ships with enough credits to flash one DSG.

Credits to flash additional DSG controllers can be purchased through the website, or through the Eurodyne flash software, under the credits menu.

Features of our DSG software include;

-Optimized shift mapping

-Decreased shift times

-Raised torque limits

-True manual mode that eliminates unwanted downshifts

-Gear display activated in dashboard

-Increased clutch clamping pressures

-more aggressive launch control settings.

Customers with the end user flash tool can use the Eurodyne flash software to check and see which files are available for their DSG controller.

Price is in USD

List Price: $699.00
Our Price: $699.00
EuroDyne Stage 1 – 2 reflash for 2.0 TSI with Powertap flash cable

This package will allow anyone with a Windows PC or tablet with USB port, and an internet connection to flash their ecu with our stage 1 or stage 2 software.

With the included Powertap interface and Eurodyne flash software you can switch between available stages and even flash the ecu back to stock if necessary.

Also included is diagnostic software that will allow you to check and clear fault codes, and datalog engine parameters.

Certain models support recoding of some modules as well. See the applicable stage 1 and stage 2 software product pages for details on power increases for your model.

We support port flashing for all models now, no ecu removal is required.

Prices are in USD

List Price: $699.00
Our Price: $699.00
EuroDyne Maestro Tuning Suite for TSI – CCTA-CBFA

Maestro tuning suite is a hardware and software package that allows users to:

Flash your vehicle an unlimited number of times with any of the supplied base files (stage 1, 2, 3, or custom tuned versions of these ),

Tune your vehicle using the supplied editor software, enable/disable fault codes (off road use only)

Datalog the ecu parameters, alter speed limiters, rev limiters, boost limiters, torque limiters, rescale for larger injectors, alter timing maps,

Run diagnostics (check and clear fault codes etc..), and read ecu measuring blocks.

ecu removal is not longer required for these ecu’s, files can be loaded through the OBD port.

Included is the Eurodyne powertap multi-protocol flash interface.

This is a purpose built, proprietary piece of hardware with on board CAN-BUS and K-line capability and a 16 bit microcontroller with field upgradeable firmware.

It was designed by us and is built in house, it is not some other company’s hardware we resell as our own.

Also included are Maestro ecu editor software, and Eurodyne flash software for reading the ecu, flashing the ecu, datalogging and diagnostics.

The package includes unlimited no-charge access to the available base files for your vehicle. This will save huge amounts of time compared to starting from scratch,

in many cases base files for popular hardware can be loaded as-is with excellent results. All base files have been developed and tested by Eurodyne including testing on our in house Mustang chassis dyno.

The stage 1 and stage 2 files are the same files we sell through our dealer network with thousands of satisfied customers running the software worldwide.

Maestro ecu editor and Eurodyne flash are windows applications, so a laptop or PC running windows will be required.

The product is limited to one vehicle. It is possible to license additional vehicles to your powertap cable at extra cost.

Prices are in USD

List Price: $799.00
Our Price: $799.00